1.Description:

This kit consists of 64 0805 chip LED display units, which can display any character of 64 pixels, such as numbers, using a row and column scanning method. The kit comes with a microcontroller that has been burned and programmed. The control core of the circuit is microcontroller U1, which continuously transmits line scan data to U2 and display data to U3 through a written program, thereby controlling the display screen to display corresponding patterns in a regular manner.

2.Parameter:

1>.Work Voltage: DC 5V

2>.Work Temperature: -25℃~85℃

3>.Work Humidity: 5%~95%RH

4>.Size: 60*50*10mm

Kit Purpose:

Advantages:

Electronic enthusiasts or electronic production of electronic student classes, in particular to optimize the arrangement of the elements according to the beginner, this package easy to manufacture and install a high success rate! As it has been used in many schools, so we know its performance. This kit is not just welding assembly, as well as adjust their own hands and the coiled coil, more fun, this is better than the other simply assembly kit. The main advantage of using the headset also takes into account the student’s classroom noise!

Features and use:

FM radio program has a rich, good sound quality, etc.All over launch its own FM radio station. The kit FM scan radio pocket computers using special blocks, 16-pin dual flat package, the working voltage of 1.8-3.6V, the circuit includes a FM radio receiver from antenna to the frequency discriminator output audio signals of all the features, it also has search tuning circuit, the signal detection circuit, a mute circuit and compression frequency offset of the frequency-locked loop FLL circuit. IF frequency of the circuit is designed to 70KHZ, peripheral circuits without intermediate frequency transformer, wherein the frequency is selected by an internal RC circuit IF filter to complete. Aircraft such as digital radio tuner that uses electrical tuning buttons (SEEK +, SEEK-), in addition to the volume control buttons (VOL +, VOL-) and the power button (PW). After the circuit is powered on, press the power button, the circuit starts to work, press SEEK + to search for high-frequency or low-end press SEEK- radio frequency search, automatic search for radio signals, tuning automatically stops, then click on the Search button if The circuit continues to search for radio stations. Frequency range is 76-108MHZ. Both receive Universal FM FM station can be received school campus radio station.

 MB-102 830  Breadboard :

• Distribution strip, Tie-point 200

• Terminal Strip, Tie-point 630

• Completely reusable

• Coloured coordinates for easy component placement

• Model:MB-102

• Phosphor bronze nickel plated spring clips

• Accepts a variety of wire sizes (29-20 AWG)

• Dimensions:165*54*8.5mm

Breadboard Power Supply Module:

• Brand new & high quality

• Breadboard power supply module, compatible with 5 V, 3.3 V

• Apply to MB102 breadboard

• Input voltage: 6.5-12 V (DC) or USB power supply

• Output voltage: 3.3V/5V can switch over

• Maximum output current: <700 ma

• Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 V

• On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.

• Please notice: this item only a Power Supply Module

65 ROOT Breadboard Cables:

• Ideal for creating circuits between your microcontroller and the breadboard on the bots

• Reusable for fast build a prototype of an electronic circuit

• Soldering is not required

• Can modify or revise the circuits easily

• Wire Length:

• Approx. 9.8 inch / 25cm

• Approx. 7.7 inch / 19.5cm

• Approx. 5.8 inch / 14.7cm

• Approx. 4.6 inch / 11.7cm

• Color: Assorted color (white, black, yellow, green, red,etc)

140 PCS Jumper Wires:

• 100% brand new and high quality

• 140pcs Solderless Breadboard Jumper Cable Lead Kit

• Hard Wire with Angled shape

• Comes with 14 kinds of different length jumper lead,each kind of jumper lead has 10 pcs with different colors, that is to say there has 140 pcs jumper lead with different length

• A transparent plastic box for convenient to carry and not easy to lost

• Color : Assorted color

• Quantity: 140 pcs

Shipping list:

1 x MB-102 Solderless Breadboard

1 x Breadboard Power Supply

1 x  65 Breadboard Jumper Cables

1 x  140pcs Jumper cables

This kit includes 10 PCS of keyestudio UNO prototype circuit board PCB.

After solder the pin headers of 2.54mm pitch on the through-holes of PCB, you can seamlessly plug it into UNO R3 controllers. It also comes with four 3mm fixed holes for you to tightly mount it.

For easy use, you can directly solder other components on the PCB through-holes to complete various prototype circuits. And you are able to stick a tiny breadboard on the prototyping area to complete various circuit experiments using jumper wires.

Features:

• 100% Brand new and high quality double-sided PCB

• All holes are plated through

• Material: high quality FR-4 PCB

• Hole pitch 2.54mm

• Hole Diameter: 1.0mm

• Comes with four 3mm fixed holes

• You need to weld the pins by yourself

• Quantity: 10 pieces/lot

Breadboard kit is a learning kit based on UNO R3 development board. It’s equipped with basic elements for ARDUINO experiments, including breadboard, Dupont wires, LEDs, resistors. With this kit, you can perform simple LED experiments, such as LED blinking, LED chasing effect, etc. It is both affordable and portable for your Arduino learning.

Kit listing:

• 1*keyestudio board

• 30*Wires

• 4*M3*10 Copper Pillar

• 4*M3*6MM Flat Head

• 4*M3*6MM Round Head

• 4*Yellow Button Cap

• 1*Breadboard

• 1*Chassis

• 1*1-digit SDsp

• 1*Active Buzzer

• 1*Passive Buzzer

• 1*Thermistor

• 5*10K Resistor

• 5*1K Resistor

• 8*220R Resistor

• 2*Tilt Switch

• 3*Photoresistor

• 1*Flame Sensor

• 1*DHT11 Sensor

• 1*LM35DZ Sensor

• 4*Touch Switch

• 1*RGB LED

• 5*Blue LED

• 5*Yellow LED

• 5*Red LED

• 1*Potentiometer

• 1*Usb Cable

  
  

Pls contact us if you need the PDF datasheet!

Kit list:

10*100R resistance

10*220R resistance

10* 330R resistance

10* 1 k resistor

10* 10 k resistor

10*100 k resistor

10*4.7 K resistor

10*47 k resistor

10* 100 pf ceramic capacitor

10* 10 nf ceramic capacitor

10* 100 nf ceramic capacitor

10* 2.2 pf ceramic capacitor

10* 10 uf electrolytic capacitor

10*470 uf electrolytic capacitor

10* Red LED

10* Green LED

10*Yellow LED

10* Blue LED

2* switches with blue hat

2*switches with red hat

2* switches with yellow hat

2* switches with green hat t

1*10 k potentiometer

2* LED RGB

1* active buzzer

1*passive buzzer

1*40 pin header

1* 400 point breadboard

1* 30 pcs jumper wires

Project list
Project 1: Hello World
Project 2: LED blinking
Project 3: PWM
Project 4: Traffic light
Project 5: LED chasing effect
Project 6: Button-controlled LED
Project 7: Responder
Project 8: Active buzzer
Project 9: Passive buzzer
Project 10: RGB LED
Project 11: Analog value reading

SHIPPING LIST:40P rainbow wire  X1