Description：
ESP32-CAM Arduino Kits: When someone approaches or there is noise,the kit wakes up,takes a candid photo,and the image is saved in the SD card.It’s a web camera,access camera streaming server on local network,with live image,face detection and face recognition functions(You can integrate it to Home Assistant).Program developed with Arduino IDE
【ESP32-CAM】:with 2 Million Pixels built-in flash Camera and SD card slot is WIFI&Bluetooth 4.2 dual-mode development board,PCB on-board antennas and cores based on ESP32 chips.It used as master mode to build independent network controller,or as a slave to other hosts MCUs to add networking capabilities to existing devices.Suitable for home smart devices,industrial wireless control,wireless monitoring,QR wireless identification,wireless positioning system signals,and other IoT applications
【HC-SR505】:When someone approach human infrared PIR body sensor,output range High,when people leave,output Low.Not repeat/repeatable 2 trigger mode.Sensitivity and Time Delay is adjustable.Sensing Angle <100°.
【Sound Sensor】: built-in capacitive electret microphone.can identify presence or absence of sound.When sound intensity exceed a certain threshold, output low signal light Off, Otherwise output High light On.Turn the spin button on the sensor board adjust the sensitivity。The module is smaller and easy to use
Note:
1. ESP32-CAM input power is at least 5V/2A, otherwise the image will unstable
2. The factory has the default firmware, no need to re-burn other firmware
3. ESP32-CAM capacity can be expanded up to 4GB
4. ESP32-CAM support for images WiFI upload
Package List:
1 x ESP32-CAM Module
1 x 2 Million Pixels Camera
1 x Program download adapter board
1 x USB to TTL Serial Cable
1 x 128M SD Card
1 x HC-SR505 Infrared IR Sensor
1 x Sound Sesnsor
1 x Data cable
6 x Dupont Cable
